Crane Service | Oxford Crane
Now Booking Crane Rentals Across OntarioHoisting engineersCall (226) 400-2111Self-Erecting · Boom Truck · Mobile Crane ServiceNow Booking Crane Rentals Across OntarioHoisting engineersCall (226) 400-2111Self-Erecting · Boom Truck · Mobile Crane Service
Oxford Crane on an Ontario job site
Industrial Crane Rental

Industrial Crane Rental

Plant-floor and yard lifts across Ontario's Oxford County industrial corridor — millwright picks, skid sets and equipment moves planned around the piece weight, the pick radius and what the plant floor can take.

Hoisting engineers
Rigging planned before arrival
Southwestern Ontario coverage
Request a Quote
Send the piece weight, the pick radius and the plant address — we match the machine to the lift before the crew mobilizes.
Dispatch replyNo obligationCall (226) 400-2111

Serving Southwestern Ontario. Form goes to dispatch.

How it works

Industrial Crane Rental

Industrial lifts in Woodstock usually mean a machine that has to reach over a wall, a pipe rack or a loading dock to set a piece inside a plant. We plan the pick around the piece weight, the radius at the set point and the ground the outriggers will sit on, then match the crane class to that plan.

Industrial crane rental for millwright picks, skid and pump sets, motor and gearbox changes, tank and vessel placements, and equipment moves in and out of plants and yards across Ontario and Oxford County.

Plant and yard lifts fail on the details — a pick radius that grows once the crane is set, a piece that has to swing over a pipe rack, or a floor that will not take the outrigger load. Those are settled before the machine arrives, not on the day.

Oxford Crane equipment on an Ontario job site
FAQ

Frequently asked questions

Piece weight, the pick radius at the set point, the lift height and the plant address are the four details that drive the plan. From those we read the load chart and pick the machine class before the crane mobilizes.
Sometimes, if the floor and the door clearances allow it and the outrigger loads are within what the slab will take. When they are not, the crane sets up outside and reaches in over the wall or roof line — that changes the radius and the machine class.
Radius is the horizontal distance from the crane's rotation centre to the load; height is how far up it goes. A load chart is read at the radius, so a piece that has to reach over a pipe rack or wall is a longer radius than the same piece set straight down.
Outriggers spread the load over pads, so the ground has to take that pressure without settling — compacted gravel, a concrete slab or a prepared pad. Soft or recently disturbed ground is flagged before the lift day so it can be addressed.
Yes. The crane and operator work to the plant's lift plan, and the millwright or rigging crew handles the piece on the hook. The lift plan is agreed before the machine arrives so the roles on the day are clear.
Yes — skid sets, pump and motor changes, tank and vessel placements and equipment moves in and out of yards are planned the same way, from the piece weight and the radius at the set point.

Request a Quote

Send the piece weight, the pick radius and the plant address — we match the machine to the lift before the crew mobilizes.

Request a Quote
Send the piece weight, the pick radius and the plant address — we match the machine to the lift before the crew mobilizes.
Dispatch replyNo obligationCall (226) 400-2111

Serving Southwestern Ontario. Form goes to dispatch.