Crane Rental for Roofing & HVAC Trades
How a lift request moves from your first call to a confirmed machine, crew and arrival window — with the site details we need up front so the right crane shows up the first time.
Request a Quote
Tadano ATF 70G-4 Rental
Tadano ATF 70G-4 Crane Rental
The ATF 70G-4 is a 70-tonne class all-terrain truck crane on a four-axle carrier — it drives to the pick on its own wheels, then sets up on outriggers for the lift.
Hoisting engineers
Rigging planned before arrival
Southwestern Ontario coverage
Request a Quote
Tell us the piece weight, the pick radius and where the crane can stand, and we will confirm whether the ATF 70G-4 is the right machine for the lift.
Dispatch replyNo obligationCall (226) 400-2111
Serving Southwestern Ontario. Form goes to dispatch.
How it works
Tadano ATF 70G-4 Crane Rental
The Tadano ATF 70G-4 is a 70-tonne all-terrain crane built on a four-axle carrier, so it travels between sites on its own wheels and sets up on outriggers once it reaches the pick. It suits lifts that start on pavement and finish on gravel or a packed pad around Woodstock and Oxford County.
Tadano ATF 70G-4 all-terrain crane rental for steel picks, precast sets, rooftop units, truss placements and general lifts across Ontario and Oxford County, with the machine, operator and rigging arranged around the piece weight and the pick radius.
A lift that looks simple on paper can stall on site if the crane cannot get close enough to the pick or the ground will not take the outrigger load. The ATF 70G-4 is chosen when the job needs road travel to the site and a real lift once it is there.
FAQ
Frequently asked questions
Capacity drops as the radius grows. The 70-tonne figure applies at a short radius on a firm pad, and the usable capacity at the actual pick radius is read off the load chart for that setup.
The ATF 70G-4 is a 70-tonne class all-terrain crane used for steel picks, precast panel sets, rooftop units and general lifts where the crane has to travel to the site on its own wheels and then set up on outriggers.
Yes. The ATF 70G-4 is built on a four-axle carrier, so it drives between sites on its own wheels and only needs a transport for the counterweight or boom in some configurations.
It sets up on its outriggers, so the ground under each pad has to take the load. A packed gravel pad or a firm hardstand works; soft or freshly filled ground needs to be checked before the crane is levelled.
The weight of the heaviest piece, the distance from where the crane can stand to where the piece has to land, the height it has to clear, and a note on the ground and the route in.
It can, if the lot has room for the outrigger spread and the ground will take the load. The approach and the turning space are checked before the crane is sent.
Request a Quote
Tell us the piece weight, the pick radius and where the crane can stand, and we will confirm whether the ATF 70G-4 is the right machine for the lift.
Request a Quote
Tell us the piece weight, the pick radius and where the crane can stand, and we will confirm whether the ATF 70G-4 is the right machine for the lift.
Dispatch replyNo obligationCall (226) 400-2111
Serving Southwestern Ontario. Form goes to dispatch.